Ver mensagens sem resposta | Ver tópicos ativos | Ver tópicos novos Hoje é 22/07/2017
Novo anúncio global importante!




Responder Tópico  [ 10 Mensagens ] 
Destrave xbox 360 slim 
Autor Mensagem
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Destrave xbox 360 slim
Estava fazendo o destrave usando o chip x360run e ltu2. Iniciei fazendo todos os procedimentos de leitura da nand e gravação usando AutoGG versão 0.9.3/80. Quando fui fazer a extração da key pela rede, não tinha um cabo crossover então fiz pelo pendrive, consegui as keys e seguindo todo o procedimento ao tentar finalizar criar xebuild e escrever esta dando erro. Sobe o xell pelo botão eject, a tela inicialmente aparece sem imagem e logo fica no xell. A Nand original sumiu da pasta, tenho nanddump, mas faltando dados: CE, CF/CG e FC. os demais dados estão preenchidos. Tenhos os seguintes arquivos: 1BL.bin, 1BLKey.txt, CBA_9188.bin, CBB_13121.bin, CD_8453.bin, CpuKey.txt, DvdKey.txt, kv.bin, LOG.txt, nanddump.bin, smc.bin, smc_config.bin. Seguindo a lógica dos arquivos deveria ter arquivos .bin para CE, CF e CF/CG. Tem como criar uma nand completa apartir destes dados?


01/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Ao usar o método com pendrive para obter as keys, seguindo o que o Autogg pedia, o xbox não desligou depois de fazer a leitura como indicava o Autogg, ele entrou em um loop fazendo a leitura e retornando a faze-la de novo, esperei por varios minutos mas seguiu sempre fazendo a mesma coisa. segue o log depois de feito a leitura:

******************************************************************************
NEW LOG Patch v(1.038)
******************************************************************************

* PCIBridgeRevisionID:-112
* DVEversion:35
* Model:Corona v2
* PCIBridgeRevisionID:-112
* DVEversion:35
* Model:Corona v2
! config: sfcx not initialized
XeLL - Xenon linux
loader second stage -git- 2013-08-14 (LibXenon.org)
* nand init
! sfcx initialization failure
! nand related features will not be
available
! config: sfcx not initialized
Found: uda0:/
! sfcx is not initialized! Unable to save CPU Key to NAND!
* CPU PVR: 00710800
* PCIBridgeRevisionID:-112
* DVEversion:35
* Model:Corona v2
* LDV:4
* 1BLKey:xxxxxxxxxxxxxxxxxxxxxxxxxxFB68563EFA
* CpuKey:5BDE31BB50A2xxxxxxxxxxxxxxxxxxxxxxx
* DvdKey:3B080xxxxxxxxxxxxxxxxxxxxxxxxx05924D
* Serial Number:402920xxxxx
* SMC 2.5
* CBA 9188
* CBB 13121
* CD 8453
Waiting for Usb Device&Files :
* FILEs SAVED:
uda0:/nand_files/402920xxxxx/1BL.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/1BLKey.txt
* FILEs SAVED: uda0:/nand_files/402920xxxxx/../../CpuKey.txt
* FILEs SAVED: uda0:/nand_files/402920xxxxx/CpuKey.txt
* FILEs SAVED: uda0:/nand_files/402920xxxxx/kv.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/DvdKey.txt
* FILEs SAVED: uda0:/nand_files/402920xxxxx/smc.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/CBA_9188.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/CBB_13121.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/CD_8453.bin
* FILEs SAVED: uda0:/nand_files/402920xxxxx/smc_config.bin

Este log que aparece na tela, sempre em loop.

com a obtenção destes dados e tentando seguir em frente ao tentar obter a nand, deu erro.


04/02/2014
Karma desse Post: 0 
Offline Perfil
Moderador - Xbox
Moderador - Xbox
Avatar de usuário

Localização: Santo André - SP
Consoles: PS2+PES+TIME DO FORUM
Live ID: TheT1000BR
PSN ID: Firma_Zuera
XLink Kai ID: T1000NI
Karma: Serious Business(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Bom,com o chip é possivel fazer funcionar facilmente,porém,como quer usar LTU,você precisa do fcrt.bin,kv.bin da sua nand original.

_________________
-Faço serviço de desbloqueio Xbox 360(Ixtreme e Reset Glitch),interessados Clique Aqui ou entrar em contato pelo e-mail satimara12@hotmail.com.


04/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
T1000 escreveu:
Bom,com o chip é possivel fazer funcionar facilmente,porém,como quer usar LTU,você precisa do fcrt.bin,kv.bin da sua nand original.


Quais os arquivos básicos necessários para a recuperação da nand? Os arquivos fcrt.bin e kv.bin da nand original, foram perdidas. Estou tentando recuperar com recova, se estiver no hd do pc. Vc tem um tutorial ou link para a recuperação do console e rodar apenas com o chip por enquanto? Li o tutorial de criar uma nand retail apartir da key e alguns arquivos da nanddump, pois esta eu tenho, mas esta apenas com os arquivos listados no log acima.


05/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Criei uma nand retail apartir dos arquivos que tinha: segue o log:


base path changed to C:\Users\Rogerio\Desktop\J-
Runner_v3_beta_2\xeBuild
---- { Image Build Mode } ----
building retail image
<enter> key on completion suppressed
data directory overridden from command line to '16537\'
per build directory overridden from command line to 'data\'
file name overridden from command line to 'C:\Users\Rogerio
\AppData\Local\Temp\Rar$EX00.472\J-
Runner_v3_beta_2\402920xxxxxx\updflash.bin'
------ parsing user ini at 'data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x1b1 bytes in memory
loading cpukey.txt from data\cpukey.txt
CPU Key set to: 0x5BDE31BB50A287Dxxxxxxxxx (weight:0x35 valid;
ecd: valid)
setting 1blkey from ini: 0xDD88AD0C9ED669E7B567xxxxxxxx
1BL Key set to : 0xDD88AD0C9ED669E7Bxxxxxxxxx sum: 0x983
(expects: 0x983)
xex Key set to : 0x20B185A59D28FDC3405xxxxx sum: 0x800
(expects: 0x800)
------ parsing ini at '16537\_retail.ini' ------
ini version 16537
ini: label [coronabl] found
found (1) 'cba_13181.bin' crc: 0x0da5267b
found (2) 'cbb_13181.bin' crc: 0x3d50b56c
found (3) 'cd_13181.bin' crc: 0xa84f3c6d
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_16537.bin' crc: 0xd2f70347
found (6) 'cg_16537.bin' crc: 0xcf8a8c3c
ini dictates dual CB for this model
ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x340f017f
found (2) 'bootanim.xex' crc: 0x1a64dd1c
found (3) 'createprofile.xex' crc: 0xbb5dfa34
found (4) 'dash.xex' crc: 0x40671195
found (5) 'deviceselector.xex' crc: 0xf80b066f
found (6) 'gamerprofile.xex' crc: 0xb55d0d4f
found (7) 'hud.xex' crc: 0xd1e27e82
found (8) 'huduiskin.xex' crc: 0x98c75ba1
found (9) 'mfgbootlauncher.xex' crc: 0x773ee67d
found (10) 'minimediaplayer.xex' crc: 0x0411007d
found (11) 'nomni.xexp' crc: 0x323c6e47
found (12) 'nomnifwk.xexp' crc: 0xbe5a4208
found (13) 'nomnifwm.xexp' crc: 0xc9c3f0e0
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x4dd243b2
found (16) 'updater.xex' crc: 0xe93cef2e
found (17) 'vk.xex' crc: 0xac383a80
found (18) 'xam.xex' crc: 0x18496d9a
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0xc558548c
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x4da51d92
ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------
output name overridden to: C:\Users\Rogerio\AppData\Local\Temp
\Rar$EX00.472\J-Runner_v3_beta_2\402920xxxxxx\updflash.bin
1BL RSA pub key file is not available, signature checks will not be
performed
PIRS RSA pub key file is not available, signature checks will not be
performed
MASTER RSA pub key file is not available, signature checks will not
be performed
------ Checking data\nanddump.bin ------
data\nanddump.bin file size: 0x3000000
nanddump header checks passed OK!
Loading NAND dump (0x3000000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a mmc machine
NAND dump uses big block controller
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x800 of size 0x3800
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0x2ffc000! Using if no
smc config is provided.
CF slot 0 decrypted ok LDV 0x04 Pairing: 0x86e677
setting pairing data from image to 0x86e677
pairing set to: 86 e6 77
LDV was already set to 4
attempting to find valid anchor block
anchor block v 1 at 0x2fe8000 is valid
anchor block v 2 at 0x2fec000 is valid
anchor block v 2 at 0x2fec000 is selected
MobileB.dat found at sector 0x38e (offset 0xe38000), size 2048
(0x800) bytes
MobileC.dat found at sector 0x38f (offset 0xe3c000), size 512
(0x200) bytes
MobileD.dat found at sector 0x390 (offset 0xe40000), size 2048
(0x800) bytes
MobileE.dat found at sector 0x391 (offset 0xe44000), size 2048
(0x800) bytes
Statistics.settings found at offset 0x2ff8000, size 4096 (0x1000) bytes
Manufacturing.data found at offset 0x2ff4000, size 4096 (0x1000)
bytes
seeking security files...
crl.bin found in sector 0x387 size 0xa00...verified! Will use if external
file not found.
dae.bin found in sector 0x388 size 0xad30...verified! Will use if
external file not found.
extended.bin found in sector 0x38b size 0x4000...verified! Will use if
external file not found.
fcrt.bin found in sector 0x38c size 0x4000...verified! Will use if
external file not found.
secdata.bin found in sector 0x38d size 0x400...verified! Will use if
external file not found.
done!
Writing initial header to flash image
------ loading system update container ------
16537\su20076000_00000000 found, loading...done!
Read 0xb34000 bytes to memory
checking integrity...
header seems valid, version 2.0.16537.0
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x7a010 bytes)
decrypting SUPD\xboxupd.bin\CF_16537.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_16537.bin (0x75aa2 bytes)...done!
------ Loading bootloaders and required security files ------
reading data\SMC.bin (0x3800 bytes)
reset smc load address to 0x800 size 0x3800
reading data\KV.bin (0x4000 bytes)
reading .\common\cba_13181.bin (0x2000 bytes)
loaded cba_13181.bin, could not check signature rsa key not
present!
reading .\common\cbb_13181.bin (0x7df0 bytes)
reading .\common\cd_13181.bin (0x5080 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
extracted SUPD\xboxupd.bin\CF_16537.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_16537.bin (0x75aa2 bytes)
reading data\smc_config.bin (0x10000 bytes)
-------------------
checking smc_config
-------------------
extracting config
valid SMC config data found at offset 0xc000
------------------
SMC config info:
------------------
Target temps: Cpu: 82øC Gpu: 78øC Edram: 76øC
Max temps : Cpu: 89øC Gpu: 82øC Edram: 82øC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 7c:1e:52:17:18:20
AVRegion : 0x00000100 (NTSC-M)
GameRegion : 0x00ff (NTSC/US)
DVDRegion : 4
resetKey : XXUD
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
could not check signature of cba_13181.bin, 1BL RSA key not
present!
done!
patch slot offset reset to: 0x70000
------ Patching boot reasons and options into flash header ------
Patching header for xell power reason
------ Encrypting and finalizing bootloaders ------
encoding SMC.bin size 0x3800
SMC checksum: ba42ab9f
known clean SMC found, type: Corona v6.2(2.05)
known/clean smc.bin found!
encoding KV.bin size 0x4000
decrypted keyvault has been set for reference
Master RSA pub not available, not checking hash
encoding cba_13181.bin size 0x2000
encoding cbb_13181.bin size 0x7df0
CB 13181 seq 0x0304000e type: 0x03 cseq: 0x04 allow: 0x000e
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0FF0F0
fuseset 02: 000F000000000000 (sequence)
fuseset 02: 0F00000000000000 (allow cseq 2)
fuseset 02: 00F0000000000000 (allow cseq 3)
fuseset 02: 000F000000000000 (allow cseq 4)
**dual CB flag detected!**
**15572+ CBB crypto method detected!**
encoding cd_13181.bin size 0x5080
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x0
encoding cf_16537.bin size 0x4560
encoding cg_16537.bin size 0x75ab0
encoding patches_corona.bin size 0x0
done!
------ Adding bootloaders to flash image ------
adding SMC.bin at raw offset 0x00000800 len 0x3800 (end 0x4000)
adding KV.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_13181.bin at raw offset 0x00008000 len 0x2000 (end
0xa000)
adding cbb_13181.bin at raw offset 0x0000a000 len 0x7df0 (end
0x11df0)
adding cd_13181.bin at raw offset 0x00011df0 len 0x5080 (end
0x16e70)
adding ce_1888.bin at raw offset 0x00016e70 len 0x56070 (end
0x6cee0)
retail image, skipping xell-gggggg.bin
adding cf_16537.bin at raw offset 0x00070000 len 0x4560 (end
0x74560)
adding cg_16537.bin at raw offset 0x00074560 len 0x75ab0 (end
0x80000, rest in fs)
retail image, skipping patches_corona.bin
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0x90000 len 0x0006a010 (end:
0x000fa010)...done!
------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x340f017f ini:
0x340f017f)
adding as aac.xexp1 at raw offset 0xfa010 len 0x00014000
(end 0x0010e010)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0x1a64dd1c
ini: 0x1a64dd1c)
adding as bootanim.xex at raw offset 0x110000 len
0x00061000 (end 0x00171000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0xbb5dfa34
ini: 0xbb5dfa34)
adding as createprofile.xex at raw offset 0x171000 len
0x0000c000 (end 0x0017d000)
extracted SUPD\dash.xex (0x597000 bytes) (crc32: 0x40671195 ini:
0x40671195)
adding as dash.xex at raw offset 0x180000 len
0x00597000 (end 0x00717000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32:
0xf80b066f ini: 0xf80b066f)
adding as deviceselector.xex at raw offset 0x717000 len
0x0000a000 (end 0x00721000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0xb55d0d4f
ini: 0xb55d0d4f)
adding as gamerprofile.xex at raw offset 0x722000 len
0x0001b000 (end 0x0073d000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0xd1e27e82 ini:
0xd1e27e82)
adding as hud.xex at raw offset 0x73f000 len 0x0001d000
(end 0x0075c000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0x98c75ba1
ini: 0x98c75ba1)
adding as huduiskin.xex at raw offset 0x75d000 len
0x00014000 (end 0x00771000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32:
0x773ee67d ini: 0x773ee67d)
adding as mfgbootlauncher.xex at raw offset 0x774000 len
0x00008000 (end 0x0077c000)
extracted SUPD\minimediaplayer.xex (0xc000 bytes) (crc32:
0x0411007d ini: 0x0411007d)
adding as minimediaplayer.xex at raw offset 0x77c000 len
0x0000c000 (end 0x00788000)
extracted SUPD\nomni.xexp (0xc800 bytes) (crc32: 0x323c6e47 ini:
0x323c6e47)
adding as nomni.xexp1 at raw offset 0x788000 len
0x0000c800 (end 0x00794800)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0xbe5a4208
ini: 0xbe5a4208)
adding as nomnifwk.xexp1 at raw offset 0x794800 len
0x00002000 (end 0x00796800)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xc9c3f0e0
ini: 0xc9c3f0e0)
adding as nomnifwm.xexp1 at raw offset 0x79a000 len
0x00005000 (end 0x0079f000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32:
0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x7a1000 len
0x00006000 (end 0x007a7000)
extracted SUPD\signin.xex (0x19000 bytes) (crc32: 0x4dd243b2 ini:
0x4dd243b2)
adding as signin.xex at raw offset 0x7aa000 len
0x00019000 (end 0x007c3000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0xe93cef2e ini:
0xe93cef2e)
adding as updater.xex at raw offset 0x7c5000 len
0x00007000 (end 0x007cc000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0xac383a80 ini:
0xac383a80)
adding as vk.xex at raw offset 0x7cf000 len 0x0000b000
(end 0x007da000)
extracted SUPD\xam.xex (0x253000 bytes) (crc32: 0x18496d9a ini:
0x18496d9a)
adding as xam.xex at raw offset 0x7db000 len 0x00253000
(end 0x00a2e000)
extracted nanddump\xenonclatin.xtt (0x11b000 bytes) (crc32:
0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0xa2f000 len
0x0011b000 (end 0x00b4a000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1
ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0xb4b000 len
0x00018000 (end 0x00b63000)
extracted nanddump\xenonjklatin.xtt (0x1a8000 bytes) (crc32:
0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0xb64000 len
0x001a8000 (end 0x00d0c000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb
ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0xd0c000 len
0x00007000 (end 0x00d13000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0xc558548c
ini: 0xc558548c)
adding as ximecore.xex at raw offset 0xd13000 len
0x00017000 (end 0x00d2a000)
extracted nanddump\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb
ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0xd2b000 len
0x00090000 (end 0x00dbb000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x4da51d92 ini:
0x4da51d92)
adding as ximedic.xexp1 at raw offset 0xdbc000 len
0x00002800 (end 0x00dbe800)
------ adding 5 security files ------
<- Processing crl.bin ->
reading data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed!
Trying alternate key...success!
adding as crl.bin at raw offset 0xdc0000 len 0x00000a00
(end 0x00dc0a00)
<- Processing dae.bin ->
reading data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed!
Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0xdc4000 len 0x0000ad30
(end 0x00dced30)
<- Processing extended.bin ->
reading data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0xdd0000 len
0x00004000 (end 0x00dd4000)
<- Processing fcrt.bin ->
reading data\fcrt.bin (0x4000 bytes)
adding as fcrt.bin at raw offset 0xdd4000 len 0x00004000
(end 0x00dd8000)
<- Processing secdata.bin ->
reading data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0xdd8000 len
0x00000400 (end 0x00dd8400)
------ checking for Mobile*.dat ------
MobileB.dat found, adding from previous parse
adding MobileB.dat as type 0x31 at raw offset 0xddc000
len 0x800 (end 0xddc800)
MobileC.dat found, adding from previous parse
adding MobileC.dat as type 0x32 at raw offset 0xde0000
len 0x200 (end 0xde0200)
MobileD.dat found, adding from previous parse
adding MobileD.dat as type 0x33 at raw offset 0xde4000
len 0x800 (end 0xde4800)
MobileE.dat found, adding from previous parse
adding MobileE.dat as type 0x34 at raw offset 0xde8000
len 0x800 (end 0xde8800)
Statistics.settings found, adding from previous parse
adding Statistics.settings at raw offset 0x2ff8000 len
0x1000 (end 0x2ff9000)
Manufacturing.data found, adding from previous parse
adding Manufacturing.data at raw offset 0x2ff4000 len
0x1000 (end 0x2ff5000)
------ adding smc_config.bin ------
adding smc config to offset 0x02ffc000, len 0x400
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xdec000 len 0x4000 (end
0xdf0000)...done!
copying anchor block 1 to offset 0x2fe8000
copying anchor block 2 to offset 0x2fec000
------ writing image to disk ------
writing file 'C:\Users\Rogerio\AppData\Local\Temp\Rar$EX00.472\J-
Runner_v3_beta_2\402920xxxxxx\updflash.bin' to disk...done!
---------------------------------------------------------------
C:\Users\Rogerio\AppData\Local\Temp\Rar$EX00.472\J-
Runner_v3_beta_2\402920xxxxxx\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build : Retail
Serial : 402920xxxxxx
ConsoleId : 524638679369
MoboSerial: 091007110xx
Mfg Date : 03/13/2012
CPU Key : 5BDE31BB50A287Dxxxxxxxxxxxxxxxxxxxxxx
1BL Key : DD88AD0C9ED669Exxxxxxxxxxxxxxxxxxxxxx
DVD Key : 3B080FF5DCDB55Cxxxxxxxxxxxxxxxxxxxxxx
CF LDV : 4
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

No Autogg, em dados a opção FC (flash config) ficou em branco.

Ainda não fiz o teste pra ver se funciona.


06/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Tentei gravar a nand apartir do arquivo updflash.bin. Gerou ECC, mas não escreveu, deu erro de I/O. Troquei o Tx Corona 4gb Nand Rw Kit, por um caseiro e teve o mesmo erro. Acredito que tenho todos os arquivos necessários, mas tá complicado.
Com cabo de rede conectado, consigo entrar o xell reloaded digitando o ip no navegador. Xell reloaded Blackcat, com 3 opções de downloads de arquivos keyvalues.bin, arquivos de texto com a key e fuseset. Na tv aparece apenas a tela azul com informações do console a tentativa de fazer a leitura de alguns arquivos inexistentes e fica assim em infinito loop. Complicado.


13/02/2014
Karma desse Post: 0 
Offline Perfil
Moderador - Xbox
Moderador - Xbox
Avatar de usuário

Localização: Santo André - SP
Consoles: PS2+PES+TIME DO FORUM
Live ID: TheT1000BR
PSN ID: Firma_Zuera
XLink Kai ID: T1000NI
Karma: Serious Business(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Bom,como disse que o kv foi perdido,esse aparelho só vai funcionar com chip.

Pegue uma nand doadora,de um console exatamente igual,extra os arquivos e gere uma nand nova com seu LDV e CPU KEY,usando a função create image without nanddump.bin ;)

_________________
-Faço serviço de desbloqueio Xbox 360(Ixtreme e Reset Glitch),interessados Clique Aqui ou entrar em contato pelo e-mail satimara12@hotmail.com.


15/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
criei uma nand a partir dos arquivos que tinha e consegui gravar, depois de ter retirado o kit tx, limpar a placa e soldar tudo de novo. O console ta ligando direitinho, boot rapidinho. Por enquanto parece tudo normal, ainda não testei todo o funcionamento do console. Obrigado.


18/02/2014
Karma desse Post: 0 
Offline Perfil
Usuário
Usuário


Consoles: xbox 360
Karma: Normal(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Configurei todo o console de acordo com o usuário. Não fiz o destrave do Drive, já que me disseram que não funcionaria. Testei dvds originais e rodou normal. Coloquei o boot do freestyler na memoria 4g, e instalei um hd interno, para backups. Hd externo e pendrive tudo funcionando certinho. Mas ainda estou tentando entender por que não irá funcionar o destrave do dvd. Pois tenho a key do dvd.


23/02/2014
Karma desse Post: 0 
Offline Perfil
Moderador - Xbox
Moderador - Xbox
Avatar de usuário

Localização: Santo André - SP
Consoles: PS2+PES+TIME DO FORUM
Live ID: TheT1000BR
PSN ID: Firma_Zuera
XLink Kai ID: T1000NI
Karma: Serious Business(?)
Responder com citação
Mensagem Re: Destrave xbox 360 slim
Claro que roda, porque não rodaria?

_________________
-Faço serviço de desbloqueio Xbox 360(Ixtreme e Reset Glitch),interessados Clique Aqui ou entrar em contato pelo e-mail satimara12@hotmail.com.


25/02/2014
Karma desse Post: 0 
Offline Perfil
Mostrar mensagens anteriores:  Organizar por  
Responder Tópico   [ 10 Mensagens ] 

Quem está online

Usuários Registrados: Bing [Bot], Google Adsense [Bot]


Você não pode criar novos tópicos neste fórum
Você não pode responder tópicos neste fórum
Você não pode editar suas mensagens neste fórum
Você não pode excluir suas mensagens neste fórum

Procurar por:
Ir para:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.
Traduzido por phpBB Brasil
Extended by Karma MOD © 2007—2010 m157y
phpBB SEO